Site: Home > Products > Through Hole Slip Rings > Details

ZYH080

ZYH080
Details

 

Specification

 

Circuits

1-24circuits

Operating Speed

0-800rpm

WorkingTemperature

-20~ +60

Working Humidity

60%RH or higher

Electrical:   

 

Voltage Rating

380VAC/DCor higher

Current  Rating

2A/5A/10A/15A/20A/30A per circuit

Dielectric Strength

≥1000V@50Hz between each circuit

Insulation Resistance

1000MΩ@ 500VDC

ElectricalNoise

1mΩMin

Mechanical: 

 

Contact Material

Precious metal

Lead Wire Size

Teflon®UL

Lead Wire Length

Standard 300mm(11.811inch)

Housing Material

Aluminum alloy

Torque

≤9.25 g·m  (for reference )

Protection

IP54 or higher

 The operational life of the unit depends upon temperature, rotation speed and environment

  Operational life ≥80,000,000 runs ref.

Installation Guide

1.Position the slip ring in the desired location and tighten four screws to shaft.

2.Route the wiring and make the necessary connections,fasten the anti-rotation tab.

 

 

 

Attentions

1.Slip ring can not support the weight of equipment which connects with it, roating equipment should be fastened
so that its weight will not fall on the rotor.

2.Slip ring should be used in dry,low dust environment.If used outdoor,shield is necessary.

3.The surface of lead wire should avoid being damaged while equiment rotating,all lead wire can not bear
weight while you put the lead wire in order.

4.No damaging the surface of lead wire while barking its end.

Typical applications

Electrical test equipment

Exhibit / display equipment

Manufacturing and process control equipment

Laboratory equipment

Indexing tables, Cable reels

Camera system

Robotics, rotary sensors, urgent illumination equipment

Aviation, military, marine and medical equipment

 
Previous: ZYH096 Next: ZYH060 Back
Hotline
zhiyouxin@zhiyouxin.com